EPDM Single-Ply Roofs

EPDM Single-Ply Roofs 2018-07-24T13:47:56+00:00

Seal Your Single-Ply Roof Against Water and Weather

EPDM Single Ply Roof

EPDM roofing is prone to leaks at the seams and penetrations due to foot traffic and weather exposure. Whether your EPDM roof is new or needs a more intense restoration, protect it with the high tensile strength of our durable coating systems.

Get Started

Benefits of Coating Your EPDM Single-Ply Roof With Inland Coatings

Single-ply roofs are vulnerable to weather, wear and tear. Here’s why you should choose Inland Coatings to protect or repair your EPDM single-ply roof:

  • True Leak Resistance & Waterproofing

    Seal and reinforce the existing membrane of your EPDM roof with a liquid rubber roof coating, protecting it against leaks. This flexible, synthetic rubber roof membrane is not only water resistant, but also resists damage from high and low temperature extremes.

  • UV Protection & Energy Efficiency

    Our durable liquid rubber roof coating is highly reflective, earning an ENERGY STAR label for its efficiency. The white finish minimizes the roof’s surface temperature, keeping your building cooler while reducing energy costs.

  • Custom Colors To Fit Your Needs

    Beyond our standard white coating, our RC-2000 coating comes in 11 additional color options — or we can provide custom colors to match your brand or building. Silicone roofing is available in standard colors.

  • Flexible Application

    Our single-ply roof coatings can be used for mechanically fastened or fully adhered single-ply EPDM roofing systems.

  • Proven Experience

    With 40 years of experience and proprietary chemistry in all of our products, Inland Coatings is the trusted name for single-ply roof restoration systems.

Application Guidelines for EPDM Single-Ply Roof Systems

Our four-step application process makes it easy to install our roof coating systems. We partner with contractors to complete all EPDM single-ply roof coating projects. Plus, contractors will provide all the necessary materials, tools, and labor to complete the job. Our four-step process is easy to follow, with no primers required for application; simply clean, seal, prep and coat the roof.

Technical Data Sheets
Design Guidelines
A contractor preps a roof to be coated with Inland's SEBS products.

Step 1 – Clean 

Power wash the roof at 2,000 PSI to remove any loose dirt and debris. Some surfaces will need a spot treatment of RC-300 cleaner.

Contractors prepare a single ply roof to be coated.

Step 2 – Seal

Apply RC-2250 to all penetrations and potential leak points. Address all seams on EPDM surfaces with RC-2250 and/or RST-400 Seam Tape.

A contractor goes over a single ply roof with Inland Coatings

Step 3 – Prep

Apply RC-2012 Base Coat at .75 gallons per 100 square feet over the entire roof surface.

A finished single ply roof coating job.

Step 4 – Coat

Apply the RC-2018 Top Coat at 1 gallon per 100 square feet over the entire roof surface.

Learn how Inland Coatings can help you protect and restore your single-ply roof.

Contact Us